ID: 68967
21 Jul 2025
~
Загрузок
~
Лайков
~
Просмотров
~
Элементов
Дождитесь загрузки BDE для получения команды
Получить команду
Для Командного Блока или Axiom мода
Открыть в BDEngine Пожаловаться
Описание

NOTE: The Oven is a small bit Bigger than an actual Block so you can put a real Furnace inside. If the Oven Model is getting darker when a Block is placed inside, go into Edit Mode and Push the Model one Block in a Direction. Then just run the Command on the Block the Oven is in Editor Mode. Desc: A modern Oven to make some yummy Food! #decoration #functional #working #kitchen #greatfood4you

Модель содержит
cyan terracotta: 9
orange stained glass: 1
yellow stained glass: 4
orange concrete powder: 1
yellow terracotta: 3
green terracotta: 1
green concrete: 1
light gray concrete: 6
gray concrete: 10
stripped spruce wood: 1
stripped birch wood: 1
stripped pale oak wood: 1
polished andesite slab: 1
polished tuff: 1
gray wool: 1
black stained glass: 1
black shulker box: 5
light gray shulker box: 4
black concrete: 1
Text Display: 10
Как переместить или повернуть модель?

Используйте окно редактора выше, чтобы повернуть или переместить модель так, как вам нужно, а затем нажмите кнопку Получить команду, чтобы получить новую команду.
Если вы хотите внести больше изменений или полностью переделать модель, откройте полную версию редактора с помощью кнопки Открыть в BDEngine.

Как использовать?

Через командные блоки:

Чтобы использовать команду в игре, вам нужен Командный Блок, так как поле чата в Minecraft имеет ограничение по количеству символов.

      1. Open the chat on the "/" button and paste this command into it:
/give @p command_block
      2. Place the Command Block in the desired location.
      3. Right-click on the Command Block and specify in the Console Command field - this model's command, which you can copy by clicking on Get the command.
      4. Change Need Redstone to Always Active.
      5. Press Done.

Теперь вы можете сломать Командный Блок и насладиться установленной моделью. Повторите процедуру несколько раз, если в окне экспорта есть несколько команд модели.

Через Axiom мод:

Обязательно установите Axiom [modrinth], если вы этого еще не сделали.

      1. Click Get the command, select Command format: Axiom and copy the command.
      2. Open the desired world in the game.
      3. Use ctrl + V to insert a model into the world.
      4. Click on the small white cube, next to the model, to move and rotate it.

Так же от Prinzenrolle26

Из той же категории

Sign up to create and share content. Registration